D-MAX DMC-20SEC Bedienungsanleitung PDF herunterladen (Seite 23)

11 May, 2006 DMC-A2 Series (ALD-00029)

Macro Sensors Tel. (856) 662-8000

www.macrosensors.com

Serial Communications (cont.)

5) In the Port Settings dialog click the arrow on the

Bits per second window and click 9600.

6) Click the arrow on the Data bits window and click

7) Click the arrow on the Parity window and click

None.

8) Click the arrow on the Stop bits window and click

9) Click the arrow on the Flow control window and

click None.

10) Click OK.

The HyperTerminal Properties dialog

appears.

11) Click the Settings tab.

12) In the Emulation list box, click Auto detect.

The other settings are not relevant to this

procedure and can be left as they are.

13) Click on the ASCII Setup button.

The ASCII Setup dialog opens.

14) In the ASCII Sending group box, click the Echo

typed characters locally check box.

The other settings are not relevant to this

procedure and can be left as they are.

15) In the ASCII receiving group box, make sure the

Append line feeds to incoming line ends check

box is not checked.

16) Click OK.

The ASCII Setup dialog closes.

17) Click OK on the New Connection Properties

dialog.

The New Connection Properties dialog closes.

STEP B Check Communications Between the Meter and

the PC

1) Type the following in the terminal program:

SR*

The current meter reading is displayed on the

PC screen.

STEP C Configure the Print String by Writing to

1) Set the print string by selecting the register

data to be downloaded by writing to register X.

For example, to set the print string to download

the current display value (from display register

2) and peak value (from peak register 12), type

the following:

SWX ~2 ~12* (the spaces must be included).

This means that the data from the meter will

display on the PC screen when the PRINT

trigger is activated.

STEP D Set the Meter to the PRINT Mode

1) Set Code 3 to [XX3] in the meter’s main

programming mode.

This allows the meter to send the measurement

data to the PC.

STEP E Download the Data from the Meter to the PC

1) Type the following in the terminal program:

The P requests the meter to download the

configured print string.

STEP F Capture the Meter Measurement Data on the

1) On the Transfer menu, click Capture Text.

The Capture Text dialog opens.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

D-MAX DMC-20SEC Bedienungsanleitung Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras D-MAX DMC-20SEC